- Service ▼
- Products ▼
✨ 20+ Years Experience | 5,000+ Global Brands All Products →
- Sustainability
- About Us ▼
- Related Resources ▼
- Contact Us
Custom Cardboard Display Stands: Floor, Counter and Pallet Displays
In brief: a cardboard display stand is specified by four things — format (FSDU floor unit, CDU counter unit, pallet display, sidekick or dump bin), corrugated grade (E-flute for counter units, B or C-flute for floor shelves, BC double wall for pallet displays), shelf span and load, and who assembles it. Most displays fail on shelf sag and on stability, not on print. MOQ is 500 pieces per design, samples 3–5 days, production 10–12 days.
01 Six formats, and where each one stands
Cardboard display stands are not one product. The format decides the corrugated grade, the load capacity, the freight cost and who in the retail chain accepts it. Getting the format wrong is the most expensive mistake in this category, because a display that fails on the shop floor cannot be reworked.
| Format | What it is | Where it goes | Typical footprint |
|---|---|---|---|
| FSDU Free Standing Display Unit | Tall floor-standing unit with 2–4 shelves | End of aisle, promotional space | 400–600 mm wide × 300–450 mm deep × 1,400–1,800 mm tall |
| CDU Counter Display Unit | Small counter or shelf-top unit | Point of sale counter, till area | 300–450 mm wide × 200–350 mm deep × 300–500 mm tall |
| PDQ Product Display Quantity | Shallow tray that sits on an existing shelf | Shelf-ready presentation | Sets to the shelf depth, usually 300–400 mm |
| Pallet display | Full-height unit built on its own pallet footprint, ships as the transport unit | High-volume promotional placement | 1,200 × 800 mm (Euro) or 1,200 × 1,000 mm |
| Sidekick | Narrow unit that clips to an existing shelf end | Secondary placement, impulse | 150–300 mm wide, full shelf height |
| Dump bin | Open bin for loose or bagged product | Promotional floor space | 400–600 mm square, 600–900 mm tall |
If you are new to the category, the practical starting point is usually an FSDU or a CDU. They cover the two placements most brands actually need, and both can be produced on standard corrugated converting equipment without custom tooling beyond a die.
02 FSDU: the floor display
The FSDU is the workhorse of retail display. It has to do three jobs at once: hold stock, look like the brand, and not fall over when a customer leans on it.
| Specification | Practical range | Why |
|---|---|---|
| Height | 1,400–1,800 mm | Below eye level so shoppers can see over it; above waist so product is reachable |
| Width | 400–600 mm | Aisle and end-cap clearances in most European grocery formats |
| Depth | 300–450 mm | Shelf depth has to support the product without overhanging |
| Shelf count | 2–4 | Each shelf adds structure and cost; three is the common compromise |
| Load per shelf | 15–25 kg single-wall | Above this, add a centre support or move to double wall |
| Base footprint | At least 1/3 of height | Stability — a tall narrow unit tips when loaded unevenly |
The stability rule that matters most: a floor display should have a base depth of at least one third of its total height. A 1,800 mm unit therefore needs about 600 mm of footprint to stand safely when the top shelf is loaded and the bottom shelf is empty. Brands routinely design a 450 mm deep base for a 1,800 mm unit because it looks slimmer in the mockup, and then the retailer rejects it or the unit tips in store.
Where an inverted-U shape is used — a single piece of board folded up to form two side panels and a header — the side panels do the structural work. Adding a locking tab or a corrugated rib between the shelves is far cheaper than increasing board grade.
03 CDU and PDQ: counter and shelf units
Counter units are smaller, lighter and cheaper, but the constraints are tighter. Counter space is contested, and a CDU that is 20 mm too wide simply will not be placed.
| Specification | CDU | PDQ tray |
|---|---|---|
| Footprint | 300–450 × 200–350 mm | Sets to shelf depth, 300–400 mm typical |
| Height | 300–500 mm | 150–250 mm |
| Corrugated | E-flute (about 1.5 mm) | E-flute or B-flute |
| Load | 5–15 kg total | 10–20 kg |
| Assembly | Auto-lock base, assembles in seconds | Folds flat, one-piece |
| Direct print or litho-laminated liner | Usually direct print |
Two details that decide whether a counter unit survives in store. First, the header — the upright panel carrying the brand and product message. If it is too tall the unit blocks the till, too low and it disappears. 150–250 mm above the product is the usual band. Second, a defined pocket depth, so the product stands up rather than slumping forward as stock sells down.
A PDQ tray is closer to packaging than to a display: it is the shelf-ready presentation format that goes straight from a shipping case onto the retail shelf. That mechanism is worth understanding before designing one — see what EU retail placement requires for the distribution context.
04 Pallet displays: the display that is also the shipping unit
A pallet display removes the step between transport packaging and display. Instead of unpacking a container of product into a display, the display itself arrives full, the outer sleeve or shroud comes off, and it is merchandised as delivered.
| Element | Specification | What can go wrong |
|---|---|---|
| Pallet base | Euro 1,200 × 800 mm or industrial 1,200 × 1,000 mm | A display built to the wrong pallet standard will not fit the retailer’s handling equipment |
| Height | Up to about 1,800 mm including product | Above this, sightlines and handling both suffer |
| Shroud / sleeve | Printed corrugated outer that tears away or lifts off | Tear direction that fails, leaving ragged edges on the shop floor |
| Load | Often 150–400 kg total | Needs BC double wall or a corrugated platform deck under the product |
| Structure | Corrugated shell around the pallet, or a tray plus header | Insufficient corner posts, so the unit crushes in a stacked container |
Pallet displays are the most demanding format to get right, because they carry a transport load and a retail function in the same structure. They are also the format with the strongest argument for doing the whole thing in one factory — the display, the shipping shroud and the print have to work together, and splitting them across suppliers creates fit problems that only show up once the unit is loaded.
05 Corrugated grades and what they actually carry
| Grade | Thickness | Typical use | Practical load guidance |
|---|---|---|---|
| E-flute | ≈1.5 mm | CDU, PDQ trays, sidekicks, display headers | Light: 5–15 kg unit weight |
| B-flute | ≈3 mm | FSDU shelves, counter units with stock | Medium: 15–25 kg per shelf |
| C-flute | ≈4 mm | Larger floor units, pallet display side panels | Medium-heavy: 25–40 kg per shelf |
| BC double wall | ≈6–7 mm | Pallet displays, heavy product, long shelf spans | Heavy: 100 kg+ with support |
Board grade is only half the answer. Shelf span decides load capacity more than grade does. A B-flute shelf at 400 mm span will hold noticeably less than the same board at 300 mm span with a centre rib. Before you specify double wall, first try shortening the span or adding a support — it is usually cheaper and it always ships lighter.
The grade your display needs also depends on the print method, because litho-lamination changes the total caliper. Laminating a printed 150 gsm liner onto B-flute gives a stiffer panel than the same B-flute printed directly.
06 The four failures that kill a display
In order of how often they cause a rejection, these are the problems to design out before sampling.
- Shelf sag. The most common failure. A shelf that visibly bows under load reads as cheap and the retailer will not reorder. Fix with shorter spans, a paperboard shelf rib, or a higher grade — in that order of cost.
- Instability. A loaded top shelf with nothing below makes the unit top-heavy. Fix with a wider base, ballast (a corrugated deck under the base with a weight pocket), or by loading the bottom shelf first in the planogram.
- Assembly at destination. If the unit has to be built on the shop floor in ten minutes by a store assistant, it needs an auto-lock or crash-lock base and no glue. If it needs glue or 30 minutes, it will not be built and the product stays in the back room.
- Product fit. Shelf heights finalised before the product is final. A 10 mm change in product height breaks a whole display programme, so confirm product dimensions before the die is cut.
07 Printing: direct print versus litho-lamination
| Method | How it works | Best for | Trade-off |
|---|---|---|---|
| Direct print | Printed straight onto the corrugated board | Short-to-medium runs, bold graphics, single or two colours, cost-sensitive | Fine detail and photographic images lose sharpness on the flute |
| Litho-lamination | A litho-printed liner laminated to the corrugated sheet | High-impact brand graphics, photographic product images, premium launches | Higher cost and a second process, plus slightly longer lead time |
| Digital direct | Digital print directly to board | Prototypes, short test runs, variable versions | Cost per unit stays high at volume |
For a display, print quality is judged at two metres, not at arm’s length. That means solid brand colours and a clear header usually matter more than fine detail, which is why direct print is the sensible default and litho-lamination is reserved for launches where the display is part of the campaign. If you want the printing itself explained, see how printing and quantity tiers work.
08 Freight and the assembly question
Displays ship flat. That is the single reason they are economical to make offshore and why the format works for international brands at all.
| Decision | Option A | Option B | What to choose |
|---|---|---|---|
| Assembly | Assembled at our factory, fixed with glue | Flat-packed, auto-lock, assembled on site | Flat-pack unless the retailer will not assemble |
| Freight cost | Pays for assembled volume — expensive | Pays for flat board — a fraction of the volume | Flat-pack for anything larger than a counter unit |
| On-site labour | None | Seconds per unit with auto-lock; minutes if glue is needed | Design for no-glue if the store builds it |
| Damage risk | Higher — assembled units crush | Lower — flat blanks are robust | Flat-pack for sea freight |
One practical note on freight: flat-packed displays are light but bulky, so they are costed on volume rather than weight. A container of flat display blanks can hold several thousand units, which is what makes the unit economics work — see how volume drives container loading.
09 MOQ, cost and what moves the number
Our MOQ is 500 pieces per design. Samples take 3–5 days and production runs 10–12 days after proof approval.
Indicative unit cost at the 500-piece tier: a CDU at USD 2–6, an FSDU at USD 8–25, and a pallet display at USD 25–70. The ranges are wide because size dominates. What moves the number, in order:
- Size and board area. The single biggest driver — a display is priced largely on the square metres of corrugated it consumes.
- Corrugated grade. E-flute to BC double wall is a large cost step.
- Print method. Litho-lamination adds a second process and a liner.
- Assembly. Pre-glued units cost more per unit and save on-site labour.
- Quantity. A die is a fixed cost; above a few thousand pieces the per-unit effect fades.
Full cost logic is in what drives the cost of custom packaging, and the MOQ policy in why custom boxes have a 500-piece minimum.
10 What to send for a quote
| # | Item | Why it changes the price |
|---|---|---|
| 1 | Format and placement — FSDU, CDU, PDQ, pallet, sidekick or dump bin | Sets the structure and the board grade |
| 2 | Overall dimensions and shelf count | Board area is the main cost driver |
| 3 | Product dimensions and weight per shelf | Determines span, grade and support |
| 4 | Retailer requirements | Some chains specify height, footprint and assembly method |
| 5 | Quantity per design | Determines the price band |
| 6 | Print method and colours | Direct print or litho-lamination |
| 7 | Assembly preference | Pre-glued or flat-pack |
| 8 | Destination and required in-store date | Changes the Incoterm, freight band and schedule |
If you do not have a structure yet, send the product dimensions and the placement, and our team will draw the display and return a 3D mockup within 24–48 hours before any tooling is committed. The full product specification sits on the custom display racks page.
For a first order from China, two things save time: read how to buy custom packaging from China and set the quality check in advance using the AQL inspection plan.
Need a display stand quoted?
Send the format, the product weight per shelf and the quantity. We will return a structure, a corrugated grade recommendation and a price band — usually within 30 minutes.
Request a quoteFrequently asked questions
What is an FSDU?
FSDU stands for Free Standing Display Unit — a tall floor-standing cardboard display with two to four shelves, typically 1,400–1,800 mm high and used in end-of-aisle or promotional space. It is the most common retail display format for a single product range.
What is the difference between FSDU, CDU and PDQ?
An FSDU stands on the floor. A CDU is a counter or shelf-top unit. A PDQ is a shallow tray that sits on an existing retail shelf as the shelf-ready presentation. They differ in size, corrugated grade and who accepts them in store.
What corrugated grade should a display stand use?
E-flute for counter units, PDQ trays and headers. B-flute for FSDU shelves up to about 25 kg per shelf. C-flute for larger floor units. BC double wall for pallet displays and heavy product. Shelf span matters as much as grade — shortening the span is usually cheaper than upgrading the board.
How much weight can a cardboard display hold?
As a working guide: E-flute units carry 5–15 kg total, B-flute shelves 15–25 kg each, C-flute 25–40 kg each, and BC double wall 100 kg or more with proper support. The real limit depends on shelf span and whether there is a centre rib.
Why do display stands sag in the middle?
Because the shelf span is too long for the board grade. A shelf that visibly bows reads as cheap and the retailer will not reorder. Fix it with a shorter span, a paperboard shelf rib, or a higher grade — in that order of cost.
What is the minimum order for custom display stands?
500 pieces per design. Samples take 3–5 days and production runs 10–12 days after proof approval. Reorders on the same die carry no tooling charge.
How much do custom display stands cost?
Indicative bands at the 500-piece tier: CDU USD 2–6, FSDU USD 8–25, pallet display USD 25–70. Size and board area dominate the price, followed by corrugated grade, print method and whether the unit is pre-glued.
Do display stands ship flat or assembled?
Flat by default. Flat-packing reduces freight volume to a fraction of the assembled size, which is the main reason offshore display production works economically. Assembly on site takes seconds with an auto-lock base and needs no glue.
Should I print directly on corrugated or use litho-lamination?
Direct print for most displays, because print quality is judged at two metres in a shop rather than at arm’s length. Use litho-lamination for launches where the display carries photographic brand imagery and the higher cost is justified.
Do retailers specify display dimensions?
Often yes. Many chains specify maximum height, footprint and assembly method, and some require a physical sample or planogram before approving a display. Confirm the retailer’s requirements before the die is cut, because a 10 mm change breaks the whole programme.
Are the displays FSC certified?
Yes. Jinglin Packaging is an FSC-certified factory (FSC-C179946). Corrugated board is FSC-certified and chain-of-custody documentation is supplied with the goods, which matters where a retailer requires a certified fibre claim.
Are you the manufacturer or a trading company?
We are the manufacturer. Jinglin Packaging runs its own corrugated converting, printing, die-cutting and finishing lines in Shenzhen, operating since 2006. There is no trading layer between you and production.
Read next
- Custom display racks — full product specification
- Paper corrugated boxes — the corrugated range
- What custom corrugated shipping boxes are
- Cardboard or corrugated: how to choose
- What drives the cost of custom packaging
- Custom packaging wholesale in the EU
- AQL for packaging: how to inspect an order
- Our manufacturing capabilities
