- Service ▼
- Products ▼
✨ 20+ Years Experience | 5,000+ Global Brands All Products →
- Sustainability
- About Us ▼
- Related Resources ▼
- Contact Us
Custom Printed Boxes Wholesale: MOQ, Pricing and Lead Times
Short answer: wholesale pricing for custom printed boxes starts at 500 pieces per design and drops sharply at 5,000 and again at 20,000. Typical unit cost runs USD 0.50–1.30 for folding cartons, 0.80–1.50 for corrugated shipping boxes, 0.70–2.50 for rigid boxes and 0.50–1.20 for printed paper bags, depending on board, print method and finishing. Production is 7–10 days after proof approval, or 10–15 days for complex structures.
01 What “wholesale” means when you print custom boxes
Wholesale is not a discount code. In custom printing it describes a production run: the point at which the setup cost — plates, die-line, cutting programme, ink mixing — is spread across enough units that it stops dominating the unit price.
That is why the minimum matters more than the discount. Below a few hundred pieces, the setup cost per box is larger than the box itself. At 500 pieces the economics start to work; at 5,000 they become competitive; at 20,000 they are as good as they get on that specification.
| Quantity per design | What changes | Typical price movement |
|---|---|---|
| 500 pieces | Minimum run. Setup spread across a small batch. | Baseline — often 2–3× the 20k rate |
| 1,000–2,000 | Same setup, more units | −20% to −30% per unit |
| 5,000 | Volume tier. Better board purchasing, longer runs. | −40% to −55% vs 500 |
| 20,000+ | Best band. Board bought to the job, print scheduled around it. | −55% to −70% vs 500 |
Two identical boxes at 500 and 20,000 pieces can differ by a factor of three in unit cost without anything changing in the design. If your business case only works at one of those numbers, that is the number to plan around — not the smallest run you can get away with.
02 Price bands by box type
The figures below are real reference bands from production runs, not list prices. They assume standard board, one or two print colours, and standard finishing. Custom tooling, unusual structures and premium finishes move you up the range.
| Box type | 500 pcs | 5,000 pcs | 20,000 pcs | What sets the price |
|---|---|---|---|---|
| Folding carton | USD 0.50–1.30 | 0.35–0.85 | 0.25–0.60 | Board grade, print colours, lamination |
| Corrugated shipping box | USD 0.80–1.50 | 0.60–1.10 | 0.45–0.85 | Flute grade, size, print coverage |
| Rigid box | USD 0.70–2.50 | 0.55–1.90 | 0.45–1.50 | Grey board weight, wrap, insert |
| Printed paper bag | USD 0.50–1.20 | 0.35–0.85 | 0.28–0.65 | Paper weight, handle type, print area |
| Corrugated mailer | USD 0.85–1.60 | 0.65–1.20 | 0.50–0.90 | Flute, closure type, inside printing |
These are reference ranges, not quotations. A box that is 20% larger uses roughly 40% more board and lands near the top of its band. A soft-touch finish adds a measurable amount per unit. The only reliable number comes from a quote on your specification.
03 What actually drives your unit price
Buyers usually assume print complexity is the main cost. In practice, four other things move the number more:
- Board grade and calliper. The single largest input. Moving from 350 gsm to 400 gsm or from E-flute to B-flute changes the sheet cost before any printing happens.
- Box size and blank area. Cost tracks board area, not box value. A taller box with the same footprint uses more sheet and costs more.
- Quantity. Setup is fixed; units are variable. This is the lever most buyers under-use.
- Structure and assembly. An auto-lock bottom costs less than a hand-glued rigid tray. Anything assembled by hand carries labour.
- Print and finishing. CMYK plus one spot is cheaper than five spots. Foil, embossing and soft-touch each add a separate pass and a separate line item.
If you need to reduce cost, ask which of these is driving it. Buyers routinely ask for a cheaper print method when the real cost is board weight or a hand-assembled structure.
04 What to send for an accurate wholesale quote
A vague brief produces a vague number. Send these and the quote is usually back within 10–30 minutes:
| Item | Why it matters |
|---|---|
| Box dimensions (L × W × H) | Determines board area and therefore the base sheet cost |
| Quantity per design | Sets the price band more than any other input |
| Box type or a reference sample photo | Folding carton, rigid, corrugated, mailer or bag |
| Board and finish preference | Or say “recommend” and we will price two options |
| Artwork or dieline | AI, PDF or a previous supplier’s file. If none, we draw the dieline |
| Number of print colours and any special finish | Each finish is a separate pass |
| Destination port or country | Changes the Incoterm and the freight band |
| Required delivery date | Tells us whether the run fits standard or expedited scheduling |
Missing artwork is not a blocker. The design team draws the dieline and returns a 3D mockup within 24–48 hours, and 1–2 digital samples before mass production.
05 Lead times, stage by stage
| Stage | Duration | What you receive |
|---|---|---|
| Quote | 10–30 minutes | Price band, per-unit cost, Incoterm options |
| Dieline and 3D mockup | 24–48 hours | Dieline drawing and a rendered mockup |
| Physical sample | 3–5 days | A made-up sample to check structure and print |
| Proof approval | Your decision | Production begins only after written approval |
| Mass production | 7–10 days | Standard structures |
| Mass production — complex | 10–15 days | Rigid boxes, die-cut structures, hand assembly |
| Sea freight | 25–40 days | Depends on destination port |
Total from brief to delivered stock is typically 6–9 weeks by sea and 2–3 weeks by air or express. Plan the reorder cycle against the sea figure, not the express one.
06 Wholesale, retail and trading companies — how to tell them apart
Three different businesses quote the same box at three different prices, and the cheapest quote is not always the cheapest outcome.
| You are buying from | How to tell | What it means for you |
|---|---|---|
| A manufacturer | Owns the printing and converting lines. Can discuss board grade, dieline tolerance and die-cutting directly. | Structural changes are quick. No intermediary margin. The person quoting understands the machine. |
| A trading company | Quotes quickly but defers technical questions or answers them second-hand. | Adds a margin. Change requests travel one extra step. Traceability ends at their office. |
| A print broker or marketplace | Competitive on simple, standard jobs. Vague on tolerance, board weight and QC process. | Fine for standard cartons. Risky when fit, finish or compliance documentation matters. |
Ask three questions and the answer is usually obvious:
- Which factory will produce this, and can I see the FSC certificate number?
- What board grade and calliper are you quoting, and what is the tolerance on the lid fit?
- If I change the insert in a reorder, does the die-line change?
A manufacturer answers all three without checking. A intermediary answers the first and defers the rest.
07 Five mistakes that make wholesale orders cost more
- Ordering below the efficient batch. A 300-piece run costs more per unit than 500 because the setup is the same and the units are fewer. If you are near the threshold, round up.
- Specifying a bespoke size per SKU. Three sizes share one die-line if the footprint is common. Ten sizes need ten setups.
- Treating the master carton as an afterthought. The export carton size determines freight volume, and freight is often a larger line item than the box.
- Approving artwork late. Production starts after written proof approval. Every day of delayed approval is a day of delayed shipping, and peak season slots fill early.
- Assuming reorders are automatic. Reorders on the same die-line carry no tooling charge — but only if the die is retained. Confirm your supplier keeps it on file.
Need a wholesale quote on printed boxes?
Send the dimensions, quantity, box type and destination port. We will come back within 30 minutes with a price band — and a dieline if you do not have one yet.
Request a quoteFrequently asked questions
What is the minimum order for custom printed boxes?
500 pieces per design and per print. That is the floor at which the setup cost stops dominating the unit price. Volume pricing applies from 5,000 pieces, and reorders on the same die-line carry no tooling charge.
How much do custom printed boxes cost?
Reference bands from real production: folding cartons USD 0.50–1.30, corrugated shipping boxes 0.80–1.50, rigid boxes 0.70–2.50 and printed paper bags 0.50–1.20 at the 500-piece tier. At 20,000 pieces those ranges roughly halve. The only reliable number comes from a quote on your specification.
Are you the manufacturer or a trading company?
We are the manufacturer. Jinglin Packaging runs its own printing, die-cutting, rigid box and finishing lines in Shenzhen, China, and has done since 2006. There is no trading layer between you and the production floor.
Do you offer OEM and ODM services?
Yes. OEM manufactures to your existing dieline and artwork. ODM develops the structure from your product — box geometry, board grade, insert and closure — and you apply your branding.
What is the lead time for a wholesale order?
Quote in 10–30 minutes, dieline and 3D mockup in 24–48 hours, physical sample in 3–5 days, and mass production in 7–10 days after proof approval (10–15 days for complex structures). Sea freight adds 25–40 days.
Can I get a sample before ordering 5,000 pieces?
Yes. For confirmed projects we produce a physical sample in 3–5 days, and 1–2 digital samples before mass production, so you can check structure, board and print registration before committing to the run.
Do you print on the inside of the box?
Yes, and on corrugated mailers and rigid boxes it is one of the highest-impact options — a printed interior against a plain exterior photographs well and reads as premium. Inside printing is a separate pass, so it carries its own line item.
Are the boxes FSC certified?
Yes. Jinglin Packaging is an FSC-certified factory (FSC-C179946). Board and wrap are FSC-certified, and we supply chain-of-custody documentation for your buyer, retailer or compliance file.
What payment terms do you offer for wholesale orders?
T/T 30% deposit and 70% before shipment, Alibaba Trade Assurance, or PayPal for sample orders. EXW Shenzhen, FOB Shenzhen/Yantian, CIF and DDP are all available depending on your destination.
Can you handle multiple SKUs in one order?
Yes, and it is normal for multi-product brands. Each design and each print carries its own 500-piece minimum, but the die-line and board grade can be shared across sizes if the footprint is common, which lowers the setup cost per SKU.
